The Mach 1 VTX, by RaceDayQuads, is truly a product built from the ground up by pilots for pilots. This video transmitter is extremely high quality, has pre-tinned direct solder pads for fast setup and repair, variable power output of 0/25/200/600mw, 7v-24v power input with onboard filtering, a u.fl connection AND the ability to solder your own antenna, and a push button channel change with a LED display. See below for a comprehensive list of features:
- No plug - direct solder pads for exceptional durability and repair ease
- Variable 0, 25, 200, 600mw output
- u.fl connection AND the ability to solder on your own antenna
- LED Display shows Band, Channel, and Power Setting - Easily change channels in seconds!
- 7v-24v Direct Input with onboard filtering
- SMA pigtail - 2.5" long
- 40CH standard channel output
- You are still able to use onboard Betaflight OSDs to change PIDs, even though this VTX does not have a Smart Port
- This VTX does not have Smart Audio
- Tested to work on 600mw with NO pigtail for 1 hour - see the video proof here!
- Compact 28x20x8mm size
Direct Solder Pads
Easy to setup, and easy to keep in the air! With pre-tinned solder pads, your VTX can be setup in mere seconds. And, when you have a sweet crash, the fix is just as easy. No more trashing VTXs just because a little connector is broken!
With 0/25/200/600mw power options, the Mach 1 Video Transmitter is perfect for any application. Whether it's race day at MultiGP or you're ripping through a park trying sweet tricks, the Mach 1 has the power option you desire.
With onboard filtering, the Mach 1 has seriously clean video. Hook up your Mach 1 directly to any ESC power lead, and you're ready to rock! The Mach 1 is also able to run off of filtered power sources (7-24v), if you wish to power it that way.
Quickly Change Channels, Band, and Power Settings
With a clear LED readout and a push button, changing channels has never been easier. The interface is simple and clear, and there is no other setup or wiring necessary.
HAMMER TESTED AND APPROVED! The RaceDayQuads team is yet to break this VTX with hundreds of flights on our first unit (the same unit we put through the 1 hr torture video!). The solder pads and extremely durable and repairs take seconds. The u.fl connector is also durable, and it allows you to direct solder your antenna on should you want to do that or should you manage to break the u.fl going full throttle into a tree.
Video Overviews and Tests
Download the Manual HERE
FPV REGULATORY NOTICE
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area. It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices. Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. RDQ cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.