Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options.
*Now shipping with the NEW T-Motor F7 HD flight controller*
*Built & Tuned Variants are available with 1-2 week lead time*
Everything you need to upgrade to a freestyle drone!
We've put together a package that includes everything you need to transition from a DJI FPV Combo to a freestyle drone! You'll be able to use the DJI Goggles you already own with our HD-SF Build Kit as well as freely pair them with any other DJI air unit compatible drone.
This starter kit includes the HD-SF Build Kit, DJI Goggles, Batteries, Charger, and Tools. Perfect for anyone with a DJI FPV Combo that is looking to transition to a freestyle quad and save some money.
*Now available with the Ducted Skylite 3" Cinewhoop*
Included in this kit:
HD-SF Build Kit (choose your frame) OR 3" Ducted Skylite Built & Tuned
- DJI Digital FPV Remote Controller
- 2 X Rotor Riot Fuel Cell - 4S 1500mAh 100C LiPo Battery
- M4AC 30W 2.5A 1-4S AC Smart Charger *Charger May Vary
- Rotor Riot Toolset
- Prop Tool
- 2 X J37 Props
- Premium Lanyard
If you've been thinking about getting into FPV drones and have been overwhelmed by all the components and different options, this is a great place to start. If you have any questions, don't hesitate to click the Support button on the bottom left of the screen and our support agents will get back to you as soon as possible.
Drone Building has never been easier!
The HD-SF Solder Free Build Kit is quick and easy to assemble, and comes ready to go with ZERO soldering or programming required - simply build the frame, plug all the components together, and you’re ready to fly!
- ZERO Soldering: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for any soldering!
ZERO Programming: No Betalight or ESC programming required, all of the MR-30 T-motor Stacks will be pre-flashed with the latest version of betaflight and BLheli and will also include a complete Betaflight Tune and Configuration Setup. Pre-programmed to work on either 4s or 6s batteries.
- Recommended Battery:
- Rotor Riot Fuel Cell 4s 1500mAh
- 4S between 1300mah to 1500mah and a 90C or higher rating
- Assembly Time: ~30 minutes - 2 hours
View the HD1-SF Build Guide Here!
Get your replacement parts here!
Available GoPro Mounts:
Input Voltage: 12v-25-2v (3-6S)
BEC: 5V/2A, 10V 2A
Dimensions: 37mm x 37mm
Mounting Holes: 30.5mm x 30.5mm
Firmware Target: TMOTORF7 (Betaflight)
MR30 Connectors with 77mm wire length
Continuous current: 4*55A
Burst current: 4*75A
BEC Output: 10V @2.0A
Weight: 17.3g (Including Heatsink)
5" Build Includes:
MR30 SF - T-motor F7 HD + F55a BLheli32 stack
- MR30 SF - Hypetrain Freestyle 2306 2450kv motors (19mm wire length)
- DJI FPV Air Unit System with DJI 720P 120FPS Camera
- 2 sets of HQ Juicy J37 4.9x3.7x3 Props
3" Ducted Skylite Includes:
- T-Motor Mini F7 3-6S 20x20 Stack w/ MR30 Connectors
- T-motor F2203.5 Motors w/ MR30 Connectors (3100KV)
- Caddx Vista With Nebula Pro Camera
- 1 set of HQ 2.9x2.9x4 Props
You Will Need:
Built & Tuned Disclaimers
FPV Regulatory Notice ⚠
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area.It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.
Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Rotor Riot cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
Built to Order Drones
- We put a lot of care into the custom construction of each craft. Custom made drones and Pre-Order sales are final.
- All pre-orders are fulfilled on a first come first serve basis.
- For specific shipping times please check the description for each Built-and-Tuned drone listing.
- Built-and-Tuned drones may come with slightly different components than originally listed, as stock varies and replacements become available. All of our replacements will be upgrades from their previous counterparts.
Suppose an item you received from Rotor Riot is faulty (“Faulty Item”) or inoperable due to a manufacturing defect. In that case, Rotor Riot may replace or repair that item at its sole discretion if Rotor Riot deems that the fault is indeed due to a manufacturing defect and not user misuse, including construction error. Rotor Riot will not be liable for equipment that might have been lost and/or damaged as a result of the Faulty Item.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.