TBS Tango 2 Pro Radio Controller - Crossfire - NDAA
Out of stock
NDAA Compliant Product Made in USA
Team BlackSheep has been at the forefront of perfecting the interface between FPV drone and mind. The TBS Tango 2 changes how radio remote controls will be from here on out! Despite being the smallest remote control available, it comes with full size hall gimbals, full-featured FreedomTX (temporary OpenTX fork), the lowest end-to-end latency of any remote and transmission system, unbreakable 3 & 2-position switches, open source operating system, built-in battery, USB-C charging, and so much more! It's not just a retouched game controller, it was designed from the ground up for R/C! The form factor and features make it the ideal take-anywhere, fly-anytime remote control.
CROSSFIRE INSIDE
The first radio with TBS Crossfire built in. This significantly lowers your cost, increases reliability and minimizes set up time. And the cherry on top are the LUA scripts being part of the familiar user interface. The antenna swivels out of the way, or doubles as a kick-stand when resting. TBS Cloud ready to go from the start. It all just makes sense.
Features
- Full size hall sensor gimbals
- Ball-bearing
- Configurable resistance and tension
- Adjustable throttle & pitch throw (+/- 10 degrees)
- Spare spring set included for lower tension
- Foldable gimbal sticks (Pro only)
- Ergonomic and compact design with comfy rubber grips
- Robust, streamlined switches
- 2x 2-position switches
- 2x 3-position switches
- 2x momentary buttons
- TBS Crossfire built-in
- CRSFShot for lowest latency and most direct response of any remote control available
- Range of up to 30km / 20mi from the palm of your hand
- Swivel-antenna that doubles as a kick-stand
- Up to 12 channels supported
- Built-in 5000mAh 1S LiPo with USB-C 2A charging (2.5 hours for full charge)
- Speech audio output with audio jack & haptic vibration alert
- Open Source remote control operating system (FreedomTX, temporary fork of OpenTX)
- Rocker dial and 3 button menu for super simple navigation
- High resolution (128*96) black & white OLED screen w/ backlight
- Digital rocker dial trim
- 100+ model memory with included SD-card
- TBS Cloud compatible
Includes
- 1 x Tango 2 Pro - NDAA
- 1 x Velvet Carry Bag with TBS Logo
- 1 x Springs Set (Lower Tension)
- 2 x Throttle limitation screws (with allen key)
- 1 x Sticker Sheet
- 1 x Tango 2 3D KeyChain (will only be included in the first run)
- 1 x Tango 2 Neck Strap Mount
MORE INFORMATION
- TBS Agent M (new! configurator and firmware update tool)
- Self-support (FAQ)
- TBS Tango 2 Manual
- TBS Tango 2 Manual - German
- Lanyard mount 3D print download
- FreedomTX source code
- Tango2 SD Card Contents download (For Freedom TX 1.0X)
- Tango2 SD Card Contents download (2020-04-03) (For Freedom TX 1.1X)
- Tango 2 SD Card Contents download (For Freedom TX 1.2x & 1.3x)
- TBS Cloud - Wifi Firmware
- TBS Agent Lite
Couldn't load pickup availability
Product Specifications
Product Specifications
What's Included
What's Included
Shipping & Returns
Shipping & Returns
Shipping: Orders are processed within 1–2 business days. Standard delivery takes 3–7 business days depending on your location.
Returns: We are happy to accept returns at Rotor Riot. As long as your item qualifies based on the guidelines below, you can print out a return form, fill out the requested information, and send the items back to us with the return form included. Once we have the package we will verify that the below guidelines are met, and then issue your refund.
⚠ FPV Regulatory Notice
⚠ FPV Regulatory Notice
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.
Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Rotor Riot cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
⚠ Remote ID Notice
⚠ Remote ID Notice
The FAA now requires most drones flown in US National Airspace to have Remote ID capability. This drone product does not comply with Standard Remote ID requirements and is therefore intended only for use Outside US National Airspace (ONAS). Such areas include FAA-Recognized Identification Areas (FRIA) and indoor spaces. It is your responsibility to ensure the use of this product complies with Remote ID requirements by flying ONAS locations or by installing a Remote ID Broadcast Module.
For more information on Remote ID visit:
https://www.faa.gov/uas/getting_started/remote_id/drone_pilots
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Discover more in our FAQ
Shoot our team an email & we’ll get back to you ASAP
How long does it take to process an order?
How long does it take to process an order?
Orders are typically processed within 1–2 business days. You will receive a confirmation email with tracking details once your order has been shipped. Please note that processing times may be slightly longer during high-demand periods or sales events.
Do you ship internationally?
Do you ship internationally?
Yes, we offer international shipping to most countries. Shipping rates and delivery times vary depending on the destination. Any applicable customs duties or taxes will be the responsibility of the recipient.
What is your return policy?
What is your return policy?
We are happy to accept returns at Rotor Riot. As long as your item qualifies based on the guidelines below, you can print out a return form, fill out the requested information, and send the items back to us with the return form included. Once we have the package we will verify that the below guidelines are met, and then issue your refund. If you received an incorrect item, or if your item is defective it is not a return, and you will need to contact customer support to open a ticket. If you have any further questions about how this process is handled please contact customer support for details.
- An item is eligible for return if it is new and unopened. This means that all of the original manufacturer’s packaging is still intact.
- Returns need to be shipped back to us within 15 days of receiving the items for a full refund. After this time you will only be eligible for store credit. (All DJI Avata Bundles must be returned within 7 days)
- Refunds are only issued after the item has been received and processed by our staff. This can take up to 3 business days after we receive the package.
- Once a refund is approved you will be notified by email. Please allow up to three days for this to be processed by your banking institution.
- Built-to-order drones that are returned are subject to a 25% restocking fee. If an order is returned to us due to customs or import fees not being paid the items are subject to a 25% restocking fee.
- Returns will always go back into the account that was used at checkout.