Description
The Walksnail Avatar HD Pro Kit features a VTX with enhanced TVS protection and support for up to 6S. This VTX delivers unmatched stability and resistance to GPS interference with a wide input voltage range of 6V to 25.2V. This kit also features 1080P compatibility, high frame starlight, a 4KM range, and 32GB built-in storage. Enjoy unparalleled performance and take your FPV adventures to new heights with this cutting-edge technology!
Features
- 1080P 120fps compatibility
- Sony Starvis Ⅱ Technology
- Built-in 32GB storage
- High frame starlight
- Lightweight design
- 22ms low latency
- Ranging Mode
- Gyroflow Support
- 4km range
- 6V-25.2V
- FOV 160°
Specifications
HD PRO CAMERA
- Resolution: 1080P/60fps;720P/120fps,720P/60fps;1080P/120fps compatibility;
- Image Sensor: 1/1.8-Inch Sony Starvis Ⅱ Sensor
- Model: Avatar HD Pro camera
- Min.Illumination: 0.00001Lux
- Dimensions: 19*19*24mm
- Shutter: Rolling shutter
- Coaxial Cable: 140mm
- Ratio: 16/9; 4/3
- Aperture: F1.6
- Weight: 9.5g
- Lens: 8Mp
- FOV: 160°
AVATAR V2 VTX
- Transmitter Power (EIRP: FCC:<30dBm;CE:<14dBm;SRRC:<20dBm; MIC:<25dBm
- Supported FC System: Betaflight; Inav; Fettec; ArduPilot;Kiss
- 1/O Interface: JST1.0*4(Power in)JST0.8*6(USB)
- Communication Frequency: 5.725-5.850GHz
- Mounting Holes: 25.5*25.5mm; 20*20mm
- Operating Temperature: -20-40℃
- Dimensions: 33.5*33.5*10.5mm
- Latency: Average delay 22ms
- Wide Power Input: 6V-25.2V
- Model: Avatar V2 module
- Recording: 1080p/720p
- OSD: Canvas mode
- Antenna: 1(IPEX)
- Storage: 32G
- Weight: 17.6g
- Channels: 8
AVATAR V2 ANTENNA
- Frequency range: 5600MHz-6000MHz
- Size: R15 X 45mm(without cable)
- Input Impedance: 50Ω
- Polarization: LHCP
- Interface: IPEX-1
- Gain: 1.9dBi
- VSWR: ≤1.5
- Weight: 2g
Includes
- 1x Walksnail Avatar V2 VTX - 32GB w/ Gyro
- 1x Walksnail Avatar HD Pro Camera
- 1x Walksnail Avatar V2 Antenna
- 1x USB transfer extension cable
- 4x M2*5*0.5mm gasket
- 1x 4 Pin silicone cable
- 4x M2*14mm screws
- 8x M2*4mm screws
- 4x M2*5mm screws
- 4x M2*6mm screws
FPV Regulatory Notice ⚠
I know tariffs suck, but the search engine and the site showed a normal MSRP price but then when go to cart to pay, a Tariff "opt out" fee is applied... if you "opt out" you don't get... the price increase should have been clear BEFORE added to cart.... adding the tariff fee at the end IS BAIT and SWITCH
Awesome.
This is a really great product, the only issue I really had with it was that I couldn’t get the VTX to update new firmware.
So far so good clear af new to digital big change from analog so I put it in a batafpv povo20 pro
I had a technical issue with the equipment, I sent an e-mail to Rotor Riot, their response was quick, to the point, easy to follow, and even my questions were typical of a newbee, they took their time to accommodate me, and respectfully they answer all my questions. GREAT SERVICE!
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.