Replacement camera for the Avatar HD Pro Kit. Includes preinstalled 14cm coaxial cable.
This camera is backwards compatible with the original Avatar VTX, but will not support gyroflow.
- Image Sensor: 1/1.8" Sony Starvis II
- Resolution: 1080P/60fps; 720P/100fps; 720P/60fps;1080P/120fps compatibility; 1080P/100fps compatibility;
- Aspect Ratio: 4:3 /16:9
- Lens: 2.1mm
- FOV: 160°
- Aperture: F1.6
- Min. Illumination: 0.00001 Lux
- Shutter: Rolling Shutter
- Coaxial Cable: 140mm
- Dimensions: 19x19x24mm
- Weight: 9.5g
- 1x Avatar HD Pro Camera
- 4x M2*4mm screws
- 4x M2*5mm screws
- 4x M2*6mm screws
- 4x M2*5*0.5mm washers
Excellent camera for night flying places with ambient light, but don't expect to go into the boonies and be able to see anything? Unless you have some forward facing Cobb LEDs with some lenses to direct the light, and or maybe a full moon and no overcast. But if you're a city folk, this thing will allow you to fly 24/7 given all the ambient light in the city. It is backwards compatible at least with the version 1 VTX from walksnail. I just use the existing camera cable from the nano cam in order to avoid pulling up the ESC and flight controller as well as the VTX on the skylight. So it's a simple install for the skylight and I'm assuming the skyliner as well. Pretty much just take the top plate off loosen your standoffs that are going horizontal to protect the camera, and you pop out the old camera mounts and put in the V2 camera mounts , remove the back plate off the camera. Unplug the cable do that for both of the cameras and you're good.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.