F7 V3 3-6S 30x30 Flight Controller
Out of stock
Replacement flight controller for the Speedybee F7 Stack.
- MCU: STM32F722
- IMU(Gyro): BMI270
- USB Port Type: Type-C
- Barometer: BMP280
- OSD Chip: AT7456E chip
- BLE Bluetooth: Supported. Used for Flight Controller configuration,built-in a single 2.4 GHz Wi-Fi-and-Bluetooth combo chip
- Flash FC Firmware Wirelessly: Supported. Please enter MENU > FC Firmware Flasher
- Download/Analyze Blackbox: Supported.Please enter MENU > Blackbox Analyzer
- DJI Air Unit Connection Two ways supported: 6-pin connector or direct soldering.
- 6-pin DJI Air Unit Plug: Supported. Completely compatible with DJI O3/RunCam Link/Caddx Vista/DJI Air Unit V1, no wire is needed to be changed.
- Flash(for BlackBox): 500MB
- BetaFlight Camera Control Pad: Yes(CC pad on the front side)
- Power Input: 3S - 6S Lipo
- 5V Output: 10 groups of 5V output, three +5V pads and 1 BZ+ pad( used for Buzzer) on front side, and 6 +5V output included in the connectors on bottom side. The total current load is 2A.
- 9V Output: 2 groups of 9V output, one +9V pad on front side and other included in a connector on bottom side. The total current load is 4A.
- 3.3V Output: Supported. Designed for 3.3V-input receivers. Up to 500mA current load.
- 4.5V Output: Supported. Designed for receiver and GPS module even when the FC is powered through the USB port. Up to 1A current load.
- ESC Signal Pads: M1 - M4 on bottom side and M5-M8 on front side.
- UART: 5 sets(UART1, UART2, UART3, UART4(For ESC Telemetry), UART6)
- ESC Telemetry UART: R4(UART4)
- I2C: Supported. SDA & SCL pads on front side. Used for magnetometer, sonar, etc.
- LED Pad: Used for WS2812 LED controlled by Betaflight firmware.
- Buzzer: BZ+ and BZ- pad used for 5V Buzzer
- BOOT Button: Supported.
[A]. Press and hold BOOT button and power the FC on at the same time will force the FC to enter DFU mode, this is for firmware flashing when the FC gets bricked. - [B]. When the FC is powered on and in standby mode, the BOOT button can be used to controller the LED strips connected to LED1-LED4 connectors on the bottom side. By default, short-press the BOOT button to cycle the LED displaying mode. Long-press the BOOT button to switch between SpeedyBee-LED mode and BF-LED mode. Under BF-LED mode, all the LED1-LED4 strips will be controlled by Betaflight firmware.
- BOOT Button: Supported.
- RSSI Input: Supported. Named as RS on the front side.
- SmartPort: Supported
- Supported Flight Controller Firmware: BetaFlight(Default),INAV
- Firmware Target Name: SPEEDYBEEF7V3
- Mounting: 30.5 x 30.5mm( 4mm hole diameter)
- Dimension: 41(L) x 38(W) x 8.1(H)mm
- Weight: 10.7g
Couldn't load pickup availability
Product Specifications
Product Specifications
What's Included
What's Included
Shipping & Returns
Shipping & Returns
Shipping: Orders are processed within 1–2 business days. Standard delivery takes 3–7 business days depending on your location.
Returns: We are happy to accept returns at Rotor Riot. As long as your item qualifies based on the guidelines below, you can print out a return form, fill out the requested information, and send the items back to us with the return form included. Once we have the package we will verify that the below guidelines are met, and then issue your refund.
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Discover more in our FAQ
Shoot our team an email & we’ll get back to you ASAP
How long does it take to process an order?
How long does it take to process an order?
Orders are typically processed within 1–2 business days. You will receive a confirmation email with tracking details once your order has been shipped. Please note that processing times may be slightly longer during high-demand periods or sales events.
Do you ship internationally?
Do you ship internationally?
Yes, we offer international shipping to most countries. Shipping rates and delivery times vary depending on the destination. Any applicable customs duties or taxes will be the responsibility of the recipient.
What is your return policy?
What is your return policy?
We are happy to accept returns at Rotor Riot. As long as your item qualifies based on the guidelines below, you can print out a return form, fill out the requested information, and send the items back to us with the return form included. Once we have the package we will verify that the below guidelines are met, and then issue your refund. If you received an incorrect item, or if your item is defective it is not a return, and you will need to contact customer support to open a ticket. If you have any further questions about how this process is handled please contact customer support for details.
- An item is eligible for return if it is new and unopened. This means that all of the original manufacturer’s packaging is still intact.
- Returns need to be shipped back to us within 15 days of receiving the items for a full refund. After this time you will only be eligible for store credit. (All DJI Avata Bundles must be returned within 7 days)
- Refunds are only issued after the item has been received and processed by our staff. This can take up to 3 business days after we receive the package.
- Once a refund is approved you will be notified by email. Please allow up to three days for this to be processed by your banking institution.
- Built-to-order drones that are returned are subject to a 25% restocking fee. If an order is returned to us due to customs or import fees not being paid the items are subject to a 25% restocking fee.
- Returns will always go back into the account that was used at checkout.