Name: TANQ 2 5" Built & Tuned Drone - 6S
Brand: Rotor Riot Builds
SKU: BNT-Tanq6SSF-AVTRPro-XFire
Price: 758.00 USD
Availability: OutOfStock

Roll over image to zoom in

Solder-Free: Everything is 100% plug-n-play, the MR30 Quick Connection System makes assembly a breeze and removes the need for most soldering! Check out our other solder-free options.

Let's Fly RC wanted one thing out of his new frame more than anything else, and that's for it to survive any and all damage. Of course, we all know nothing does that better than a tank. This new frame is made to be the most rugged you can find, and it succeeds.

Choose the video system that matches your goggles, and which receiver you would like in your build. If you have questions about what options would be best for you, please contact customer support, they would be more than happy to help.

Build Includes

1x Tanq 2 5" Frame - By LetsFlyRC
1x F7 HD+F55A PROII 3-6S 30x30 Stack with F7 FC and 32Bit 55A ESC Solder-Free
4x Hypetrain Let's Fly RC 2306 1850kv Motor Solder-Free
1x Set of Kwad Skidz (in black)
2x HQ Juicy J37 4.9x3.7x3 Props
Video System Choice

DJI O3: DJI O3 Air Unit with Tanq O3 Camera Mount
Fatshark / Avatar HD: Avatar HD V2 Pro Dual Antenna or Avatar HD V2 Micro Dual Antenna
DJI RunCam Link: Runcam Link Wasp HD Camera and VTX
Analog: Aura Analog FPV Camera and X2 Ultimate VTX

DJI O4 Pro with TANQ 2 & S DJI O4 Pro Dual Antenna Mount

Receiver Choice

DJI (This will use the DJI O3 or Runcam Link as the receiver)
Ghost: Zepto 2.4GHz Receiver For Ghost Protocol (This part does not have a connector, repairs will require soldering)
Crossfire: Nano (SE) 915GHz Receiver For Crossfire Protocol (This part does not have a connector, repairs will require soldering)
ELRS: RP1 2.4GHz Receiver For ELRS Protocol (This part does not have a connector, repairs will require soldering)

Recommended Accessories

6S 1300mAh 120C LiHV Battery with XT60 Connector

The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area.

It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.

Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Rotor Riot cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.

The FAA now requires most drones flown in US National Airspace to have Remote ID capability. This drone product does not comply with Standard Remote ID requirements and is therefore intended only for use Outside US National Airspace (ONAS). Such areas include FAA-Recognized Identification Areas (FRIA) and indoor spaces. It is your responsibility to ensure the use of this product complies with Remote ID requirements by flying ONAS locations or by installing a Remote ID Broadcast Module.

For more information on Remote ID visit:

https://www.faa.gov/uas/getting_started/remote_id/drone_pilots

https://fpvfc.org/remote-id-final-rule-summary

My first 5” drone

Been flying whoops for a while now, but it’s summertime and love flying outside. Even in Wyoming we get a couple months of fly able weather. Lots of fun I wish the whole update firmware was not so much of a learning curve. If you have the $ buy a kit, or learn drone coding. Which one day you will need to learn anyways.

Built great, but not tuned

build quality is great, however all 4 motors where spinning the same direction and a lot of betalight settings not set correctly to make a good OOB experience

Flys great it is a bit heavy but you will get used to the mass quickly with the right battery the punch is way better than expected for the weight of the quad. Averaging 3.5-7 minutes of flight depending on how hard I go.

Very Sturdy

This prebuild is very tough. Its my very first drone and I don't know if any other drone would survive what i put this thing through during my first few flights. FPV quality is very impressive also.

Awesome Quad!

It's been a blast to fly, easy to get started, and already proven to be very durable! It gets a lot of attention at the field!

1 2 3

Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.

Country

Province

Zip code

Recover password

Create my account

TANQ 2 5" Built & Tuned Drone - 6S

Description

Build Includes

Recommended Accessories

FPV Regulatory Notice ⚠

Remote ID

Customer Reviews

Payment & Security

Estimate shipping

Other pilots also purchased

Recently viewed