When initially released, the Blaster Motors were made with one specific purpose - to let you fly hard and push your limits, develop your skills and become a better pilot, without taking a toll on your wallet!
By owning Blaster Motors, you are automatically covered by the Blaster Replacement Program. This means that if your motor breaks or wears out, you can replace it at a very low cost!
The Blaster Motor does not make any compromises when it comes to durability or performance. The open design allows the motor to dissipate heat more easily and facilitates cleaning and maintenance compared to fully enclosed motors.
The base follows the standard Hypetrain 16x16mm mounting screw layout, which optimizes mounting options, maintaining compatibility with older frames and saving a little bit of weight.
The design of the Hypetrain Blaster resembles a Radiation Hazard symbol, evoking memories of Rotor Riot’s radioactive adventures in Chernobyl. The top of the bell is made from aluminum and anodised to a sleek matte black finish, while the steel magnet ring is black with beautiful gold plated highlights. The distinctive bell is supported by a weight saving hollow-core steel shaft, and held in place with a hex shaft screw, facilitating motor service.
Through the implementation of an open, “naked bottom” type aluminum base, the Blaster reduces excess material to a minimum, saving weight while reducing heat accumulation in the motors stator and windings. The base maintains the standard Hypetrain 16x16mm mounting pattern, which optimizes mounting options, maintaining compatibility with older frames and saving an extra bit of weight.
The Hypetrain Blaster is built on a 2207 stator, which provides explosive throttle response on the top end with great control feel, and the copper winding specifications have been tuned to achieve a balanced 2450kv, optimizing efficiency for most 5” propeller choices on the market while increasing throttle resolution.
In other words, if you’re looking for a motor for a 5” quad, with excellent balance between performance, agility, speed and efficiency, the Hypetrain Blaster should definitely be high on your list!
- Unique Bell Design
- Machined Aluminum Top and Bottom
- Hollow Stainless Steel Shaft
- Shaft Screw (No C-clip)
- “Naked Bottom” Design
- Copper Windings
- Silicone Sheathed Wires
- Square Mounting Pattern
- Unique Serial Number on the Motor Base
- Weight: 32 grams
- Stator Size: 2207
- KV: 2450 KV
- Shaft: Hollow Steel Shaft
- Wires: 118mm long, 20 AWG, silicone sheath
- Mounting Pattern: 16x16mm
Blaster Replacement Program ☢
The Blaster Motors included in this product are covered by the Blaster Replacement Program!
The Blaster Replacement Program makes replacing broken or worn out motors cheaper, reducing the cost of getting your drone airworthy again!
We created the Replacement Program to give pilots more confidence to push the limits of their skills by reducing the fear of crashing and damaging components. We believe new pilots progress faster when you remove the fear of breaking something.
With recent advancements in FPV technology, even more people are joining the hobby... which is why we are doubling down on the Blaster Replacement Program!
After all, our mission is to help people get in the air, and keep them flying!
Frequently Asked Questions
HOW DOES THE FLY HARD REPLACEMENT PROGRAM WORK?
Just by owning a Blaster Motor, you are covered by the Blaster Replacement Program.
If your Blaster Motor breaks, you can get a brand new replacement through the Blaster Replacement Program, at just $15.99!
To get your discount, take photos of your broken Blaster motors with the serial numbers clearly visible.
Email the photos to us at firstname.lastname@example.org - we’ll get back to you with a discount code for your replacement motors!
DO I HAVE TO SEND THE BROKEN MOTOR IN?
No. You don’t have to send the broken motor in to receive a replacement. Just submit a claim, and we’ll send you the discount!
HOW MANY REPLACEMENTS CAN I RECEIVE?Each Blaster motor is eligible to be replaced once. If you get the replacement motor, and break that one too, you can also get that one replaced!
Every Blaster motor you break, is a Blaster Motor you can replace!
Motors work great but the motor bell seems to easily bend and become warped/not symmetrical. Even with light crashes I find that the motors eventually get scratchy and not smooth.
Worst motors I've ever used.... Go ahead and buy them if you don't believe me & find out the hard way... Go with T-Motor or xing
The motors are beast mode Definitely buying more of these guys.
I'm new to FPV, so I have used my CL1 as a learning and beater drone. The motors are great and take a beating. My only gripe s that I wish the motors had reverse threads because I have to tighten the screws on the two motors that are reversed almost all the time.
Great motor. Have been running these now for a month or so on an HD1. Fettec loves these motors! They come down colder than my ex's heart, and punch out faster than my stuff ended up on her front lawn! Wouldn't recommend the ex, but these motors can take money from my wallet any day <3
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.