-
*Note: The Brave F7 is only compatible with Betaflight 4.5.1. The Brave F7 will not work with older versions of Betaflight*
Introducing the Rotor Riot Brave F7 Flight Controller, proudly crafted in the USA and fully NDAA compliant. Built for serious FPV enthusiasts, it offers top-tier reliability and performance.
The Brave F7 can be fully built without any soldering. Featuring plug options for GPS, HD VTX, Analog VTX, Camera, RX, and ESC, it ensures seamless integration. It also offers solder pads in front of each plug for those who prefer direct soldering.
Built to perform and endure, the Rotor Riot Brave F7 Flight Controller is your go-to for an outstanding FPV experience.
Specifications- MCU: STMF722RET6
- Gyro: BMI270
- Barometer: BMP390
- Blackbox Memory: 16Mb
- Input Voltage: 3-8S Lipo
- BEC Output: 10V/2A, 5V/3A
- OSD: AT7456
- UARTS: 6
- Dimensions: 37mm x 37mm
- Mounting Holes: 30mm x 30mm
- Weight: 8g
- Firmware Target: RRIOT_F722 (Betaflight)
Includes- 4x FC Vibration Dampeners
- 1x Long FC to ESC Wiring Harness
- 1x Short FC to ESC Wiring Harness
- 1x DJI O3 VTX Wiring Harness
- 1x Avatar HD V2/Moonlight Wiring Harness
-
To simplify Betaflight setup, the Brave F7 Flight Controller will power peripheral accessories via USB when connected to a computer. However, if you're using a high-power VTX (Walksnail Avatar), you may experience Betaflight connectivity issues. If this happens, disconnect your VTX or connect a battery while you're plugged into a computer.
Copy & Paste the following into the CLI to calibrate the OSD voltageibat_lpf_period = 30
ibata_scale = 112
ibata_offset = 0vbat_scale = 101
vbat_divider = 10
vbat_multiplier = 1SAVE
This is a great FC. It has a lot of great features! I like the built in pit switch functionality, lots of available resources. and the price is spot on. I have installed it in my daily driver. Make sure to update the config with the CLI provided at the end of the wiring diagram page to calibrate your battery voltage or else it will not show correct voltage.
To make this a throuugh review, let me give out what I think are the positives and negatives:
Positives:
Supports 8s
6 UARTS
2 extra motor outputs
Built in pit switch
Through-hole solder pads (which I like, I know some don't)
Negatives:
Solder pads are very close to the plastic plugs on the top.
Pit switch only controls the Analog VTX power pad.
No LED pad
All in all I think this is a great FC for the price, and I'd feel comfortable recommending it to my friends.
Probably my fault but I bent the pin And the flight controller blew. I've never bent a pin before though.
It is so well thought out. No more soldering and the customer service at rotor riot is unmatched.
I put it in my AOS HS5 high speed quad with an AM32 60A ESC.
Installed on 7" foxeer mega
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.