The Runcam Link Wasp HD Camera and VTX Kit is another advanced video transmission module by Runcam and fully authorized by DJI that supports a 5.8GHz digital video signal and 720p 120fps image transmission. The Runcam Link Wasp HD Camera and VTX Kit is designed for FPV drones, and it can be used with DJI FPV Goggles, which provide digital high-definition pictures and a transmission range of up to 4km. The Link system allows up to eight drones to fly simultaneously. Each operator has an exclusive channel, which helps reduce cross-interference and provides an optimal racing experience.
- Link VTX
- Frequency: 5.725-52.850GHz
- Maximum Distance: FCC / SRRC < 4KM
- Working Voltage: 7.4-26.4V @4-9W
- Dimensions: 29x29x13mm
- Weight: 19.5g
- Wasp Camera
- Image Sensor: 1/3"
- FOV: D155° H125° V96°
- Dimensions 19x19x19mm
- Cable Length: 120mm
- Shutter: Rolling
- Weight: 7.5g (with cable)
- Resolution: 720P 120FPS (4:3)
- 1x Link VTX
- 1x Wasp Camera
- 1x Antenna
- 1x 6-Pin JST Cable
FPV Regulatory Notice ⚠
The use and operation of this type of product in the USA and many other countries may require a license and some countries may forbid its use entirely. In the USA, you will need a "HAM" amateur radio license. Learn more about HAM licenses, and find a HAM license exam session in your area.
It is your responsibility to ensure that the use of this product meets the requirements imposed by your government's rules and regulations for RF devices.
Do not purchase this product if you are unsure of the government requirements or are not able to comply with them. Rotor Riot cannot be held responsible for your actions if you purchase and/or use this product in violation of your government's regulations. By agreeing to our terms and conditions during the check-out process, you also agree to have read and to understand this notice.
Link with Wasp Camera For DJI HD Video System
It's a great camera clear and sharp good for low lights too, I just wish you could switch from 14.3 to 16.9 frame. But not too much of a big deal cause I usually use the 14.3 anyways.
Just as good as caddix. 4:3 aspect ratio no 16:9 only difference I prefer 4:3 for fpv anyways. save some money. Highly recommend
You have to buy 2mm bolts. Most frames have 3 mm holes. It’s a mess. You have to put 4 m2x20 bolts with a washer through the bottom the tape them on. Now on the other side you have to put another washer. Then good luck finding 2mm gels. I used o-rings but they aren’t great.
Payment & Security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.