MAMBA Basic F405 MK3 FC& 40A/50A 8bit 6S Stack
Diagram Link From Help Centre Link
Fixed
- Add I2C function
- When you connect the USB, the receiver and OSD settings can be saved
- Increase the pad area
- LED signal selection （when Mamba Led sys avaiable）
- BEC short circuit protection
- TVS instant high voltage protection 30V
Update
- F405 models support F.prot（Most）
- Upgrade the anti-interference cable
- Use Typec（Most）
- The pad area of Mini flight controller (20×20) increased by 140%
Added
- Add self-recovery insurance to the receiver's 5V power supply
- Increase the camera VCC power supply pad
- Standard flight controller (30.5×30.5) adds spare pad
- Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference
FC Specifications
MAMBA Basic F405MK3
MCU: 168MHz STM32F45RGT6
GYRO: MPU Series Six-Axis
Barometer: Yes
OSD: Yes
Blackbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600
ESC Telemetry: Yes
Power Led: Yes
LED Controller: BF LED/MB LED（4 Set 2812 LED）
S/F.Port: Yes
RSSI: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25.2V)
TVS Protection: Yes
BEC:3.3V 0.5A& 5V 3A ( (System Power)&5V 3A(LED)& 9V 3A
MOUNTING: 30.5mm, M3
ESC Specifications
MAMBA F50_BLS
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:50A×4
BURST CURRENT:60A (10S)
BEC: No
Target：BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 30.5mm/M3
MAMBA F40 BLS
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:40A×4
BURST CURRENT:50A (10S)
BEC: No
Target：BLHeli_S CH40
SOFT: Dshot300/600
TVS Protection: Yes
MOUNTING: 30.5mm/M3
MAMBA 55A -128K
INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)
CONTINUE CURRENT:55A×4
BURST CURRENT:65A (10S)
BEC: No
Target：BLHeli_32 MAMBA F55_128K
SOFT: Dshot300/600/1200
PWM:24~128K
TVS Protection: Yes
MOUNTING: 30.5mm/M3
Supply :
High-Frequency 470uF/35V ×1
8pin sh1.0 ×2
12AWG 100mm ×2
AMASS Original XT60
